Search

Currency

Scorpion HK-4530 Brushless Motor (500Kv, 6mm Shaft, Limited Ed)

Scorpion HK-4530 Brushless Motor (500Kv, 6mm Shaft, Limited Ed)

Manufacturer : Scorpion

SKU : HK-4530-500-SHAFT

Availability : In stock

Price : $349.99 $170.00

Qty: Buy now

The Scorpion HK-45 series motor* is designed for using on 700 class helicopters running on 12-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for a 700 class electric helicopter and also produces 20% more torque than the Scorpion popular HKIII-4035 series motors and exceed 89% efficiency.

Each of the new HK-4530-500KV Limited Edition motor is wound with a single strand of 1.5mm wire for the highest possible efficiency. This motor is capable of running continuously at an input power of 4800 watts at 115 amps, and can handle peak inputs of 11000 watts and 250 amps for 2 seconds.

Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

*This motor is using 30mm bolt spacing on the mounting with M4 Screw holes

HK Patent No. : HK1141674

China Patent No. : ZL2010 2 0298704.9

Taiwan Patent No. : M399539

German Utility Patent No. : 202012006207.7

U.S Patent No. : Pending

All Others Worldwide Patent : Pending

Specifications

Stator Diameter45 mm (1.77 in)
Stator Thickness30 mm (1.18 in)
No. of Stator Arms12
No. of Stator Poles10
Motor Wind5T+5T Turn Wye
Motor Wire1-Strand 1.5 mm
Motor Kv500KV RPM/Volt
No-Load Current (Io/10V)1.85 Amps
Motor Resistance (RM)0.0107 Ohms
Max Continuous Current115 Amps
Max Continuous Power4800 Watts
Weight565 Grams (17.25 oz)
Outside Diameter56.7 mm (2.23 in)
Shaft Diameter5.98 mm (0.24 in)
Body Length60.6 mm (2.39 in)
Overall Shaft Length100.0 mm (3.94 in)
Max Lipo Cell12s
Max Peak Current250A (2 seconds)
Max Peak Power11000 Watts (2 seconds)
Motor Timing5deg to 15 deg
Drive Frequency8kHz

Included in the Box

1 x Scorpion HK-4530-500KV Motor

* Gold connectors are not soldered nor included

Weight including packaging

894g

Full Dimension

View Scorpion HK-4530-500KV 6mm Shaft (Limited Edition) Full Dimension
Length60.6 mm (2.39 in)
Motor Wind5T+5T Turn Wye
Motor Timing5deg to 15 deg
Stator Diameter45 mm (1.77 in)
Motor Wire1-Strand 1.5 mm
Peak Current115 Amps
Stator Thickness30 mm (1.18 in)
No. of Stator Arms12
Shaft Diameter5.98 mm (0.24 in)
Shaft Length100.0 mm (3.94 in)
Width56.7 mm (2.23 in)
Drive Frequency8kHz
Motor KV500
Weight565 Grams (17.25 oz)
TJOOS-16210575